Denon 3808CI Owners Manual - Page 60

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting QUICK SELECT QUICK SELECT Quick Select Function With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in the memory. 1 Set the input source, input mode, surround mode, room EQ settings and volume to the conditions you want to store. 2 Press and hold the desired QUICK SELECT. Keep pressing the button until the quick select indicator lights. Personal Memory Plus Function This function sets the settings (input mode, surround mode, etc.) last selected for the individual input sources. When you switch to an input source, the settings are automatically set to the ones that were set the last time that input source was used. The surround parameters, tone control, room EQ settings and the volumes of the different speakers are stored for the individual surround modes. [Quick Select Defaults] Quick Select 1 Quick Select 2 Quick Select 3 Input Source DVD TV/CBL VCR Volume -40 dB -40 dB -40 dB Last Function Memory This stores the settings as they were directly before the standby mode was set. When the power is turned back on, the settings are restored to as they were directly before the standby mode was set. • To call out the settings, press QUICK SELECT at which the desired settings were stored. • The Quick Select name can be changed (vpage 34). NOTE Input sources stored with the quick select function cannot be selected if they have been deleted at GUI menu "Manual Setup" - "Option Setup" - "Source Delete" (vpage 34). In this case, store them again. Backup Memory The various settings are backed up for about 1 week, even if the power is turned off or the power cord is disconnected. About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 57