Denon AVR-1312 Owners Manual - Page 24

Basic version Advanced version GViews on the displayH Standard playback q w q Shows a decoder to be used. • A DOLBY DIGITAL decoder is displayed as "DOLBY D". • A DOLBY DIGITAL Plus decoder is displayed as "DOLBY DIGITAL +". w Shows a decoder that creates sound output from the surround back speakers. For an input signal that can be reproduced in each surround mode, see "Surround modes and surround parameters" (vpage 48). Multi channel stereo playback This mode is for enjoying stereo sound from all speakers. 1 Playing the source (vpage 12 - 17). 2 Press SURROUND 0 or SURROUND 1 to select "MULTI CH STEREO". Multi channel stereo playback begins. NOTE When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or DTS Express, you cannot select multi channel stereo mode. Stereo playback This is the mode for playing in stereo. The tone can be adjusted. • Sound is output from the front left and right speakers and subwoofer. • If multichannel signals are input, they are mixed down to 2-channel audio and are played. 1 Playing the source (vpage 12 - 17). 2 Press SURROUND 0 or SURROUND 1 to select "STEREO". Stereo playback begins. Virtual playback This mode is for enjoying surround effects using only the front speakers or headphones. 1 Playing the source (vpage 12 - 17). 2 Press SURROUND 0 or SURROUND 1 to select "VIRTUAL". Virtual playback begins. Direct playback Sound recorded in source is played as is. • Surround back signals are not created. • In this mode, the following items cannot be adjusted. • Tone (vpage 38) • RESTORER (vpage 39) 1 Playing the source (vpage 12 - 17). 2 Press SURROUND 0 or SURROUND 1 to select "DIRECT". Direct playback begins. NOTE When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or DTS Express, you cannot select virtual mode. Information 21