Denon AVR-4800 Owners Manual - Page 20
Before setting up the system, Setting the type of speakers
View all Denon AVR-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Before setting up the system 1 Check that all the connections are correct, then turn on the main unit's power. 2 SYSTEM SETUP TITLE Display the System Setup Menu. Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used. 1 At the System Setup Menu select "Speaker Configuration". 2 ENTER Switch to the speaker configuration screen. 3 Set whether or not speakers are connected and, if so, their size parameters. • To select the speaker • To select the parameter Center Sp. Front Sp. Subwoofer Surround Sp. A Surround back Sp. Surround Sp. B 20
20
Before setting up the system
Setting the type of speakers
1
Check that all the connections are correct, then turn on the main unit’s power.
2
Display the System Setup Menu.
TITLE
SYSTEM
SETUP
•
The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the
combination of speakers actually being used.
1
At the System Setup Menu select “Speaker Configuration”.
2
Switch to the speaker configuration screen.
ENTER
3
Set whether or not speakers are
connected and, if so, their size
parameters.
•
To select the speaker
•
To select the parameter
Center Sp.
Front Sp.
Subwoofer
Surround Sp. A
Surround back Sp.
Surround Sp. B