Denon AVR-4800 Owners Manual - Page 26
Home Thx Cinema, Wide Screen, Super Stadium, Rock Arena, Jazz Club, Classic Concert, Mono Movie, - weight
View all Denon AVR-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
8 Select "Yes". 9 10 ENTER a. If the "Auto" mode is selected: Test tones are automatically emitted from the different speakers. The test tones are emitted from the different speakers in the following order, at 4-second intervals the first time and second time around, 2-second intervals the third time around and on: 1spkr SB FL C FR SR SBR SBL SL SW Flashing 2spkrs When the surround back speaker setting is set to "1spkr" for "Speaker Configuration", this is set to "SB". Use the CURSOR buttons to adjust all the speakers to the same volume. The volume can be adjusted between -12 dB and +12 dB in units of 1 dB. Example: When the volume is set to -12 dB while the test tone is being produced from the subwoofer b. When the "Manual" mode is selected Use the and cursor buttons to select the speaker from which you want to produce the test tone, then use the and cursor buttons to adjust so that the volume from the different speakers sounds the same. Flashing Example: When the volume is set to -12 dB while the subwoofer is selected After the above settings are completed, press the ENTER button again. The "Channel Level" screen reappears. To cancel the settings, select "Level Clear" and "Yes" on the "Channel Level" screen, then make the settings again. The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position. If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test tone by ear is difficult, use a well known music selection and adjust for natural balance. NOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer's own volume control. When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect ALL surround modes. Consider this mode a Master Channel Level adjustment mode. After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each surround mode on Page 46. You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, 5CH/7CH STEREO, DOLBY/DTS SURROUND, HOME THX CINEMA, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, and MATRIX. When using either surround speakers A or B, or when using surround speakers A and B at the same time, be sure to adjust the balance of playback levels between each channel for the various selections of "A or B" and "A and B". 26