Denon AVR-4800 Owners Manual - Page 69

Specifications - audio video receiver

Get Denon AVR-4800 PDF manuals and user guides View all Denon AVR-4800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

17 SPECIFICATIONS 2 Audio section • Power amplifier Rated output: (All properties shown are only for the power amplifier stage.) Stereo (2ch driven) 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 130 W + 130 W (8 Ω/ohms, 1 kHz with 0.7% T.H.D.) Surround 125 W x 5 ch (8 Ω/ohms, 1 kHz with 0.7% T.H.D.) Dynamic power: 170 W x 2 ch (8 Ω/ohms) 270 W x 2 ch (4 Ω/ohms) 350 W x 2 ch (2 Ω/ohms) Output terminals: Front/Center: 6 ~ 16 Ω/ohms Surround: A or B 6 ~ 16 Ω/ohms A + B 8 ~ 16 Ω/ohms • Analog Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +0, -3 dB (DIRECT mode) S/N: 105 dB (DIRECT mode) Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode) Rated output/maximum output: 1.2 V / 8 V • Digital D/A output: Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.005% (1 kHz, at 0 dB) S/N ratio - 105 dB Dynamic range - 96 dB Digital input: Format - Digital audio interface • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 8 V Distortion factor: 0.03% (1 kHz, 3 V) 2 Video section • Standard video jacks Input / output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +0, -3 dB • S-video jacks Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +0, -3 dB • Color component video terminal Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms Cb (blue) signal - 0.7 Vp-p, 75 Ω/ohms Cr (red) signal - 0.7Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 20 MHz - +0, -3 dB 2 Tuner section [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) [AM] Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV 50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) Signal to Noise Ratio (IHF-A): MONO 80 dB 50 dB STEREO 75 dB Total Harmonic Distortion (at 1 kHz): MONO 0.15% STEREO 0.3% 2 General Power supply: AC 120 V, 60 Hz Power consumption: 10.9 A Maximum external dimensions: 434 (W) x 181 (H) x 494 (D) mm (17-3/32" x 7-1/8" x 19-29/64") Weight: 21.5 kg (47 lbs 6 oz) 2 Remote control unit (RC-869) Batteries: R6P/AA Type (two batteries) External dimensions: 70 (W) x 215 (H) x 24 (D) mm (2-3/4" x 8-15/32" x 15/16") Weight: 200 g (Approx. 7 oz) (including batteries) * For purposes of improvement, specifications and design are subject to change without notice. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
69
17
SPECIFICATIONS
2
Audio section
•
Power amplifier
Rated output:
Stereo (2ch driven)
(All properties shown are only
125 W + 125 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
for the power amplifier stage.)
130 W + 130 W
(8
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Surround
125 W x 5 ch (8
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Dynamic power:
170 W x 2 ch
(8
Ω
/ohms)
270 W x 2 ch
(4
Ω
/ohms)
350 W x 2 ch
(2
Ω
/ohms)
Output terminals:
Front/Center:
6 ~ 16
Ω
/ohms
Surround:
A or B
6 ~ 16
Ω
/ohms
A + B
8 ~ 16
Ω
/ohms
•
Analog
I
nput sensitivity / input impedance:
200 mV
/
47 k
Ω
/kohms
Frequency response:
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N:
105 dB (DIRECT mode)
Distortion:
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output/maximum output:
1.2 V
/
8 V
•
Digital
D/A output:
Rated output
—
2 V (at 0 dB playback)
Total harmonic distortion
—
0.005% (1 kHz, at 0 dB)
S/N ratio
—
105 dB
Dynamic range
—
96 dB
Digital input:
Format
—
Digital audio interface
•
Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV
/
8 V
Distortion factor:
0.03% (1 kHz, 3 V)
2
Video section
•
Standard video jacks
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz
—
+0, –3 dB
•
S-video jacks
Input / output level and impedance:
Y (brightness) signal
—
1 Vp-p, 75
Ω
/ohms
C (color) signal
—
0.286 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz
—
+0, –3 dB
•
Color component video terminal
Input / output level and impedance:
Y (brightness) signal
—
1 Vp-p, 75
Ω
/ohms
Cb (blue) signal
—
0.7 Vp-p, 75
Ω
/ohms
Cr (red) signal
—
0.7Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 20 MHz
—
+0, –3 dB
2
Tuner section
[FM]
(note: μV at 75
Ω
/ohms, 0 dBf = 1 x 10–15 W)
[AM]
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 μV (11.2 dBf)
18 μV
50 dB Quieting Sensitivity:
MONO
1.6 μV (15.3 dBf)
STEREO
23 μV (38.5 dBf)
Signal to Noise Ratio (IHF-A):
MONO
80 dB
50 dB
STEREO
75 dB
Total Harmonic Distortion (at 1 kHz):
MONO
0.15%
STEREO
0.3%
2
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
10.9 A
Maximum external dimensions:
434 (W)
x 181 (H)
x 494 (D) mm (17-3/32” x 7-1/8” x 19-29/64”)
Weight:
21.5 kg (47 lbs 6 oz)
2
Remote control unit (RC-869)
Batteries:
R6P/AA Type (two batteries)
External dimensions:
70 (W) x
215 (H)
x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”)
Weight:
200 g (Approx. 7 oz)
(including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.