Denon AVR 688 Owners Manual - English - Page 11

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH Video Conversion Function • This function automatically converts various formats of video signals input to the AVR-688 into the format used to output the video signals from the AVR-688 to a monitor. • The AVR-688's video input/output circuitry is compatible with the following four types of video signals: Digital video signals: HDMI Analog video signals: Component video, S-Video and Video GFlow of video signals inside the AVR-688H Main zone High picture quality playback HDMI connector HDMI connector Speaker Connections Speaker Installation The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor. Subwoofer Center speaker Surround back speakers Component video connectors S-Video connector Video connector Video inputs Component video connectors Monitor S-Video connector Video connector Video outputs Front speakers Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. Surround speakers When not using this function, connect a monitor output with the same type of connector as the video input connector. NOTE • HDMI signals cannot be converted into analog signals. • Component input video signals cannot be output to anything other than component video connectors. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. The table below shows a typical speaker configuration for the AVR-688. 7.1-channels (FRONT A+B) 7.1-channels 6.1-channels 5.1-channels 3.1-channels 2.1-channels 2-channels FRONT L R S S S S S S S S S S S S S S SURROUND CENTER L R S S S S S S S S S S S S S - - - - - - - - SURROUND BACK L R 1 only SUBWOOFER S S - S S S - S - - S S - - - S - - - S - - - S - - - -