Denon AVR 688 Owners Manual - English - Page 31

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Power On Level This sets the volume set when the main zone's power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. -80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. g ~ A1 2ch Direct/Stereo Custom Make speaker settings for 2-channel mode playback. [Display] 1.Sp 2.In 3.Op E Option Setup E 5 2ch Cstm OFF E 5 2ch Cstm ON E 6 2ch F Large E 7 2ch SW Yes E 8 2ch LFE Norm E 9 2ch FL 12ft E 10 2ch FR 12ft E 11 2ch Freq 80 Setting To change the settings, select "ON". [Selectable items] OFF : Use the same settings as in "Speaker Setup". ON : Make separate settings for 2-channel mode. Front Select front speaker size. [Selectable items] Large Small : S elect front speaker size. Subwoofer Select subwoofer use. [Selectable items] Yes No : S elect subwoofer use. ENGLISH Subwoofer Mode Select low range signal to be reproduced by subwoofer. [Selectable items] LFE (Normal) LFE+Main : S elect subwoofer signal. Distance FL Set distance from listening position to front left speaker. [Variable range] 0ft ~ 60ft Distance FR Set distance from listening position to front right speaker. [Variable range] 0ft ~ 60ft Crossover Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz : Select crossover frequency. Operations (vpage 22) 28