Denon AVR 688 Owners Manual - English - Page 28

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH Operating from the remote control unit a, s HDMI In Assign Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the STANDARD mode. The adjusted levels for the different modes are automatically Select HDMI connector to assign to this source. [Display] stored in the memory. GAdjusting using test tonesH q Press the TEST button. Test tones are output from the various speakers. w Use the o p button to adjust so that the volume is equal for all speakers. 1.Sp 2.In 3.Op W Input Setup W 1 HDMI1 DVD e When the adjustments are completed, press the TEST button W again. 2 HDMI2 TV • When "System Setup" - "Speaker Setup" - "Surround Back Speaker" setting (vpage 23) is set to "1spkr", the surround back speaker display is "SB". • Speakers set to "None" in the speaker configuration settings are not displayed. • When "Channel Level" is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 41. [Input terminals] HDMI1 HDMI2 [Assignable input sources] DVD/HDP TV/CBL VCR V.AUX Input terminals Default setting HDMI1 DVD/HDP HDMI2 TV/CBL d ~ h Digital In Assign Select digital input connector to assign to this source. [Display] 1.Sp 2.In 3.Op W Input Setup W 3 COAX1 DVD W 5 OPT1 CD [Input terminals] COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2 [Assignable input sources] CD AUX CDR DVD/HDP TV/CBL VCR V.AUX Input Setup Use this procedure to select the input source and make the settings related to playing input sources. a, s HDMI In Assign d ~ h Digital In Assign j iPod Assign k ~ A0 Component In Assign A1 ~ A4 Video Convert A5 Audio Delay A6 EXT. IN Subwoofer Level A7 Auto Preset Memory A8 Antenna Aiming • With HDMI, the video and audio signals are transferred simultaneously. (The HDMI audio signal is output from the monitor.) At this time, set the input mode to "Auto". • The audio signals input from the analog, digital and EXT. IN connectors are not output to the monitor. Input terminals Default setting COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2 DVD/HDP TV/CBL CD VCR Operations (vpage 22) 25