Denon AVR 688 Owners Manual - English - Page 44

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH ui , op [Front] uiop [CH SELECT] [Rear] uiop Other Operations and Functions Other Operations Recording on an External Device (REC OUT mode) You can listen to one program source while recording a different program source. 1 Press until "RECOUT" appears on the display. ZONE2 RECOUT 2 Turn to choose the input source to be recorded. The "REC" indicator and the indicator for the selected source light. RECOUT SOURCE RECOUT TUNER ···· RECOUT XM 3 Play the program source. For operating instructions, refer to the respective equipment's operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 36). 4 Start recording. For operating instructions, refer to the respective equipment's operating instructions. • To cancel, press , then turn until "ZONE2 SOURCE" is displayed. • Make a test recording before starting the actual recording. • Sources selected with the REC OUT mode are output from ZONE2 as well. • In the REC OUT mode, the remote control unit's ZONE2 mode buttons cannot be operated. NOTE • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • Digital signals are not output from the REC OUT (CDR/TAPE and VCR) connector. Convenient Functions Channel Level You can adjust the channel level either according to the playback sources or to suit your taste, as described below. 1 Press or [CH SELECT]. FL Vol.+ 1.5dB 2 Use ui, or [CH SELECT] to select the speaker. The speaker that can be set switches each time one of the buttons is pressed. 3 Use o p to adjust the volume. b "OFF" can be set by pressing o when the subwoofer's volume is set to -12 dB. About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 41