Denon AVR 788 Owners Manual - English - Page 14

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH Connecting Equipment with HDMI connectors With HDMI connections, the video and audio signals can be transferred with a single cable. DVD player )%.* 065 Monitor )%.* */ b The AVR-788 is equipped for HDMI version 1.3a.This version is compatible with other versions, allowing connection to all components equipped with an HDMI connector. b The AVR-788 is compatible with 30- and 36-bit Deep Color. Compatible audio format Details 2-channel linear PCM 2ch 32-192 kHz 16/20/24 bits Multi-channel linear PCM 8ch 32-192 kHz 16/20/24 bits Dolby Digital, DTS Bitstream Discs (examples) CD, DVD-Video, DVD-Audio DVD-Audio DVD-Video Copyright protection system (HDCP) In order to play the digital video and audio signals of a DVDVideo or DVD-Audio disc using HDMI/DVI connections, both the connected DVD player and monitor must be equipped for a copyright protection system called "HDCP" (Highbandwidth Digital Content Protection). HDCP is a copy protection technology consisting of data encoding and mutual identification of the devices. The AVR-788 is HDCP-compatible. For details on the DVD player or monitor you are using, refer to its operating instructions. NOTE • Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM. • The AVR-788 cannot be controlled from another device via the HDMI cable. • The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device. • Video signals are not output properly when using devices that are not HDCP-compatible. • Video signals are not output if the input video signals do not match the monitor's resolution. In this case, switch the DVD player's resolution to a resolution with which the monitor is compatible. • If the menu "Manual Setup" - "HDMI Setup" setting (vpage 25) is set to "AMP", the sound may be interrupted when the monitor's power is turned off. • Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product). • If the monitor or DVD player does not support deep color, deep color signal transfer is not possible. • If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible. • When the AVR-788 and DVD player are connected using an HDMI cable, also connect the AVR-788 and monitor using an HDMI cable. • If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable. When using a DVI cable, no audio signals are transmitted. • Use a Deep Color compatible cable for connection to Deep Color compatible devices. When connecting with an HDMI/DVI converter cable (adapter) • HDMI video signals are theoretically compatible with the DVI format. When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an HDMI/DVI converter cable, but depending on the combination of components in some cases the video signals will not be output. • When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly due to poor connections with the connected cable, etc. • By default, the HDMI audio signals are output from the speakers connected to the AVR-788. • To output the sound from the TV, make the settings at menu "Manual Setup" - "HDMI Setup" - "TV" (vpage 25). 11