Denon AVR 788 Owners Manual - English - Page 44

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH SOURCE SELECT BAND SHIFT MASTER VOLUME Playback Operation on the remote control unit Set [MODE SELECTOR 1] to "AUDIO" then press [SOURCE SELECT]. The desired input source can be selected directly. PRESET CHANNEL TUNING [Front] [OFF] SHIFT SOURCE SELECT [ON/SOURCE] PRESET CHANNEL [TUNER] [MODE SELECTOR 1] [Rear] SOURCE SELECT MASTER VOLUME [MUTING] [MODE SELECTOR 2] [TUNER] Preparations Turning the Power On 1 Press . The power indicator lights red and the power is set to the standby mode. 2 Press or [ON/SOURCE]. The power indicator flashes green and the power turns on. Turning the Power Off qPress or [OFF]. The power is set to the standby mode. wPress . The power indicator turns off, and so does the power. NOTE Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, either press to turn off the power, or unplug the power cord from the power outlet. Operations During Playback Adjusting the Master Volume Either turn or press [MASTER VOLUME]. Turning Off the Sound Temporarily (Muting) Press [MUTING]. To cancel, press [MUTING] again. Muting can also be canceled by adjusting the master volume. Listening with Headphones Plug the headphones into . The sound from the speakers and pre-out connectors is automatically cut. Selecting the input source Operation on the main unit Turn . NOTE Be careful not to set the volume too high when using headphones. Switching the front speakers Press . TUNING [MODE] [MEMORY] BAND About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit If "Rec Select" is selected for the input source, press before turning . 41