Denon AVR 788 Owners Manual - English - Page 42

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH g Night Mode Optimized setting for late-night listening. [Selectable items] OFF : Turn night mode off. LOW : Low setting. MID : Middle setting. HIGH : High setting. Operating from the remote control unit Press the NIGHT button. OFF LOW MID HIGH h Audio Delay Compensate for mismatched timing between video and audio. Delay audio. This sets the delay time for audio signals. [Variable range] 0 ms ~ 200 ms If you wish to adjust the "Audio Delay" while playing HDMI or component video signals, press u to set "OSD" to "OFF". This way the audio delay can be adjusted while watching the picture. (Press u again to switch to the on-screen display.) This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front Speaker" set to "Large", "Tone Defeat" to "ON" and "Room EQ" to "OFF".) Information Information can be called out directly by pressing the DISPLAY button on the remote control unit. Status Shows information about current settings. F Menu screen F 5.Information 1.Status 2.Audio Input Signal 3.HDMI Information 4.Auto Surround Mode 5.Quick Select 6.Preset Station 5-1.Status Select Source:DVD/HDP Name :DVD/HDP Surround Mode: STEREO Input Mode :AUTO 1/4 a Main Zone Shows information about settings for main zone. The items displayed differ according to the input source. [Items to be checked] Select Source Name Surround Mode Input Mode Rec Select Video Select Source Level Room EQ Night Mode RESTORER etc. s ZONE2 Shows information about settings for multi-zone. [Items to be checked] Audio Input Signal Shows information about audio input signals. F Menu screen F 5.Information 1.Status 2.Audio Input Signal 3.HDMI Information 4.Auto Surround Mode 5.Quick Select 6.Preset Station 5-2.Audio Input Signal Surround Mode: DOLBY DIGITAL EX SIGNAL:Dolby Digital fs :48kHz Format:3/2/.1 Offset:-4dB [Items to be checked] Surround Mode : The currently set surround mode is displayed. SIGNAL : The input signal type is displayed. fs Format Offset Flag : The input signal's sampling frequency is displayed. : The number of channels in the input signal (front, surround, LFE) is displayed. : The dialogue normalization correction value is displayed. : "MATRIX" is displayed if the input signal has undergone matrix processing, "DISCRETE" if the input signal has undergone discrete processing. Dialogue normalization function This is automatically activated when playing Dolby Digital sources. This function automatically corrects the standard signal level for individual program sources. The correction value can be checked using the STATUS button on the main unit. Offset -4dB The figure is the correction value when the standard level is corrected. Power Select Source Volume Level 39