Denon DCM 390 Serial Protocol - Page 39
Power ON, Table 61. Power ON command, Table 62. Power ON answer
UPC - 081757506991
View all Denon DCM 390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Revision1.40 Date 24.May.'07 DCM390 Serial Interface Specification 39 page of 40 2.6. 21 Power ON command This command releases the "Stand-by" status. After "Power ON" command the device will do some operations for reset and return Answer code. At last the device resets itself. 1) Command format Byte/bit 7 6 5 4 3 2 1 0 0 STX (0x02) 1 Command code ('N') 2 Reserve (0x00) 3 Reserve (0x00) 4 Reserve (0x00) 5 Reserve (0x00) 6 ETX (0x03) 7 BCCH (high-level) 8 BCCH (low-level) Table 61. Power ON command 2) Answers returned Byte/bit 7 6 5 4 3 2 1 0 0 STX (0x02) 1 Reply code ('N') 2 Answer code (Table 3) 3 ETX (0x03) 4 BCCH (high-level) 5 BCCL (low-level) Table 62. Power ON answer 3) Special condition - This command accepts only "Stand-by" status. - This device cannot receive any commands within 2 seconds after this command is sent. - After Power ON command, the host shall wait the device becomes ready status. The device returns not Ready status for Request Status command before get ready. D&M