Dewalt DXCM201 Instruction Manual - Page 8

English WARNING: RISK OF HOT SURFACES WHAT CAN HAPPEN HOW TO PREVENT IT • Touching exposed metal such as the compressor head or outlet tubes, can result in serious burns. • Never touch any exposed metal parts on compressor during or immediately after operation. Compressor will remain hot for several minutes after operation • Do not reach around protective shrouds or attempt maintenance until unit has been allowed to cool. • Repairs attempted by unqualified personnel can result in serious injury or death by electrocution. • Electrical Grounding: Failure to provide adequate grounding to this product could result in serious injury or death from electrocution. Refer to Grounding Instructions paragraph in the Installation section. • Any electrical wiring or repairs required on this product should be performed by authorized service center personnel in accordance with national and local electrical codes. • Make certain that the electrical circuit to which the compressor is connected provides proper electrical grounding, correct voltage and adequate protection. WARNING: RISK OF ELECTRICAL SHOCK WHAT CAN HAPPEN HOW TO PREVENT IT • Your compressor is powered • Never operate the compres- by electricity. Like any other sor outdoors when it is rain- electrically powered device, ing or in wet conditions. if it is not used properly it • Never operate compres- may cause electric shock. sor with protective covers removed or damaged. 8