Dewalt DXPW1200-E Instruction Manual - Page 4

Save These Instructions, For Future Use - parts

Page 4 highlights

&OHMJTI 16. The narrow pin point stream is very powerful. It is not recommended for use on painted surfaces, wood surfaces or items attached with an adhesive backing. 17. Keep operating area clear of all persons and animals. 18. Always use both hands when operating pressure washer to maintain complete control of the wand. 19. Do not touch nozzle or water spray while operating. Never place hands in front of nozzle. 20. Wear safety goggles while operating. Wear protective clothing and footwear to protect against accidental spraying. 21. Disconnect power plug from the outlet when not in use and prior to the detaching of the high pressure hose. 22. Never tie knots or kink the high pressure hose as damage could result. Inspect the high-pressure hose regularly. Replace the hose immediately if it is damaged, worn or shows any signs of cracks, bubbles, pinholes, or other leakage. Never grasp a high-pressure hose that is leaking or damaged. 23. Do not operate or store this product in temperatures below 40 °F (4 °C). Freeze damage is not covered by the warranty. 24. Carefully observe all chemical instructions and warnings before using. Use only approved pressure washer cleaners. Do not use bleach, chlorine, or any cleaners containing acids. Always follow manufacturer's label recommendations for proper use of cleaners. Always protect eyes, skin and respiratory system from cleaners. 25. The pressure washer should not be used in areas where gas vapors may be present. An electric spark could cause an explosion or fire. 26. To minimize the amount of water getting into the pressure washer, the unit should be placed as far as possible from the cleaning site during operation. 27. To prevent accidental discharge, the spray gun should be secured by locking the trigger when not in use. 28. To allow free air circulation, the pressure washer should NOT be covered during operation. 29. Never touch, grasp or attempt to cover a pinhole or similar water leak on the high-pressure hose. The stream of water IS under high pressure and WILL penetrate skin. 30. Use only hoses and accessories rated for pressure higher than your pressure washer's psi. Never use with any other manufacturer's accessories or components. 31. Never defeat the safety features of this product. 32. Do not operate machine with missing, broken or unauthorized parts. 33. Never spray flammable liquids or use pressure washer in areas containing combustible dust, liquid, or vapors. WARNING: Risk of injection or injury. Do not direct discharge stream at persons. SAVE THESE INSTRUCTIONS FOR FUTURE USE MOTOR OVERLOAD The electric motor in this pressure washer is equipped with an overload protection device which will automatically shut off the motor in the event the motor draws excessive current or overheats. The device will automatically reset itself and resume normal operation after a short period of time. GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

4
16. The narrow pin point stream is very powerful. It is not
recommended for use on painted surfaces, wood surfaces or
items attached with an adhesive backing.
17. Keep operating area clear of all persons and animals.
18. Always use both hands when operating pressure washer to
maintain complete control of the wand.
19. Do not touch nozzle or water spray while operating. Never
place hands in front of nozzle.
20. Wear safety goggles while operating. Wear protective clothing
and footwear to protect against accidental spraying.
21. Disconnect power plug from the outlet when not in use and
prior to the detaching of the high pressure hose.
22. Never tie knots or kink the high pressure hose as damage
could result. Inspect the high-pressure hose regularly. Replace
the hose immediately if it is damaged, worn or shows any signs
of cracks, bubbles, pinholes, or other leakage. Never grasp a
high-pressure hose that is leaking or damaged.
23. Do not operate or store this product in temperatures below
40 °F (4 °C). Freeze damage is not covered by the warranty.
24. Carefully observe all chemical instructions and warnings before
using. Use only approved pressure washer cleaners. Do not
use bleach, chlorine, or any cleaners containing acids. Always
follow manufacturer’s label recommendations for proper use
of cleaners. Always protect eyes, skin and respiratory system
from cleaners.
25. The pressure washer should not be used in areas where gas
vapors may be present. An electric spark could cause an
explosion or fire.
26. To minimize the amount of water getting into the pressure
washer, the unit should be placed as far as possible from the
cleaning site during operation.
27. To prevent accidental discharge, the spray gun should be
secured by locking the trigger when not in use.
28. To allow free air circulation, the pressure washer should NOT
be covered during operation.
29. Never touch, grasp or attempt to cover a pinhole or similar
water leak on the high-pressure hose. The stream of water IS
under high pressure and WILL penetrate skin.
30. Use only hoses and accessories rated for pressure higher
than your pressure washer's psi. Never use with any other
manufacturer’s accessories or components.
31. Never defeat the safety features of this product.
32. Do not operate machine with missing, broken or unauthorized
parts.
33. Never spray flammable liquids or use pressure washer in areas
containing combustible dust, liquid, or vapors.
WARNING:
Risk of injection or injury. Do not direct discharge
stream at persons.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
MOTOR OVERLOAD
The electric motor in this pressure washer is equipped with an
overload protection device which will automatically shut off the motor
in the event the motor draws excessive current or overheats. The
device will automatically reset itself and resume normal operation after
a short period of time.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The