Dymo 1761334 Technical Reference - Page 28
ESC E Form Feed, ESC e Set Print Temperature to Default, Parameters, Description, See Also, Expression
View all Dymo 1761334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Command Reference ASCII Decimal Hex ESC d 27 100 1B 64 Parameters None ESC E Form Feed Description Prints the contents of the text buffer and advances the print media. The distance the media will advance depends on two factors: the feed distance specified by the GS L command and the presence of a punch hole. The LabelWriter printer will advance until a punch hole is detected or until the feed distance (specified by the GS L command) has been reached. When the printer is powered on, the feed distance stored in flash memory is used as the default distance; the factory default is 7.5 inches. A new feed distance specified by the GS L command will override the flash memory setting until the printer is either powered down or a reset command is issued (by the ESC @ or ESC * command). The FF and ESC E commands are the same and produce the same result. See Also FF Expression ASCII ESC E Decimal 27 69 Hex 1B 45 Parameters None ESC e Set Print Temperature to Default Used to adjust the printing strobe. This command is also supported by the LabelWriter SE300 and the LabelWriter 400 and 450 series printers. Expression ASCII ESC e Decimal 27 101 Hex 1B 65 Parameters 22