Dymo 1761334 Technical Reference - Page 55
GS w Set Barcode Module Width, GS ~ Enter Debug Mode, Parameters, Description, Expression
View all Dymo 1761334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Commands ASCII GS W Thin Thick Decimal 29 87 Thin Thick Hex 1D 57 Thin Thick Parameters Thin thickness of thin bars Thick thickness of thick bars GS w Set Barcode Module Width Description Selects the horizontal size of a barcode module. The parameter n represents the thickness of the thin bars (in dots). Each dot measures .0049 inches in 203 dpi and .0073 inches in 138 dpi. With Code 3 of 9, Interleaved 2 of 5, and Codabar barcodes, the thick bars will be automatically adjusted to 2 * n. Expression ASCII GS w n Decimal 29 119 n Hex 1D 77 n Parameters the desired horizontal size (in dots) of thin barcodes; with Code 3 of 9, Interleaved 2 of 5, and n Codabar, thick barcodes = 2 * n GS ~ Enter Debug Mode Description Prints the received printer codes either as a Hex or ASCII dump. This allows you to debug print problems. The debug mode remains in effect until the printer is powered off. Expression ASCII GS ~ n Decimal 29 126 n Hex 1D 7E n Parameters n = "a" ASCII dump of received characters n = "h" Hex dump of received characters 49