Dymo 1761334 Technical Reference - Page 41
GS h Set Barcode Height, GS k Print Barcode, Description, Expression, Parameters
View all Dymo 1761334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Commands GS h Set Barcode Height Description Defines the height of the bars (in dots) for barcodes. The height is defined in n/203 inch increments. For example, specify 203 as the value for n to print a 1-inch high barcode. The barcode height is always rounded up to the next multiple of 8. Expression ASCII GS h n Decimal 29 104 n Hex 1D 68 n Parameters n the desired height (in dot lines) of the barcode GS k Print Barcode Description Prints a barcode at the current position in the current orientation. The n parameter selects the symbology to be printed. (See the table below.) The m parameter specifies how many characters are to be encoded as part of the barcode. If the number of characters to be encoded is variable, the m parameters can be set to zero. This will cause the printer to read the next character sent as a delimiter character. Further characters will then be encoded into the barcode until a character is found that matches the start character. Expression ASCII GS k n m d1...dm Decimal 29 107 n m d1...dm Hex 1D 6B n m d1...dm Parameters n Selects the barcode symbology to be used Specifies the number of characters to be encoded. Also specifies which m EAN/UPC symbology will be used d1...dm The data characters to be encoded. Character Value n=0 n=1 Barcode Symbology POSTNET reserved 35