Dymo 1761334 Technical Reference - Page 39
GS A Starting Position of Bar Code, GS DC2 Set Font to Double Height, Description, Expression
View all Dymo 1761334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Commands None GS A Starting Position of Bar Code Description Defines the distance from the left where the first barcode will print. The distance is represented in n/203 inch (dot) increments. This command is used to center a barcode on a text line. Expression ASCII GS A n1 n2 Decimal 29 65 n1 n2 Hex 1D 41 n1 n2 Parameters n1 the most significant byte n2 the least significant byte Inches/203 = (n1 * 256) + n2 Length # of Dots n1 n2 0.5 102 0 102 1.0 203 0 203 2.0 406 1 150 3.0 609 2 97 GS DC2 Set Font to Double Height Description Causes the current font to be printed at twice its normal height. The double-height setting will remain in effect until the current line attributes are cleared See Also 33
Commands
None
GS A Starting Position of Bar Code
Description
Defines the distance from the left where the first barcode will print. The distance is
represented in
n
/203 inch (dot) increments. This command is used to center a barcode
on a text line.
Expression
ASCII
GS A
n1 n2
Decimal
29 65
n1 n2
Hex
1D 41
n1 n2
Parameters
n1
the most significant byte
n2
the least significant byte
Inches/203 = (
n1
* 256) +
n2
Length
# of Dots
n1
n2
0.5
102
0
102
1.0
203
0
203
2.0
406
1
150
3.0
609
2
97
GS DC2 Set Font to Double Height
Description
Causes the current font to be printed at twice its normal height. The double-height
setting will remain in effect until the current line attributes are cleared
See Also
33