Dymo LabelManager® PnP User Guide 1 - Page 8
Maintaining Your Label Maker, Recharging the Battery
View all Dymo LabelManager® PnP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Maintaining Your Label Maker Recharging the Battery The label maker is shipped with the lithium-ion battery partially charged. The battery is recharged through the USB connection to your computer. NOTE The label maker must be connected to a powered USB port. The label maker may not charge or function properly when connected to a non-powered USB port, such as those on some Mac keyboards, or a non-powered USB hub. The label maker status is displayed in the lower-left corner of the software window. The following table describes the possible states of the label maker. Label maker is connected and battery is charging Label maker is connected and battery is not charging Label maker is not connected Label maker is connected and there is a problem with the battery To charge the battery 1 Make sure the USB cable is connected to both the label maker and the computer. 2 If necessary, press the power button to turn on the label maker and begin charging the battery. 6