Dynex DX-55L150A11 User Manual (English) - Page 16

12 DX-55L150A11 Understanding the basics • To select a digital channel, press the number buttons to select the main digital channel, then press the dot (.) button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel. Note: Button presses must be within three seconds of each other. • Press RECALL to go to the last channel viewed. Adjusting the volume To adjust the volume: • Press VOL /VOL to to increase or decrease the volume. • Press MUTE to temporarily turn off all sound. Press MUTE again to restore the sound. Displaying program information To display program information: • Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution. • Digital signal information-Displays channel number, station name, channel label (if preset), broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times when watching a digital channel. • Analog signal information-Displays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel. • Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster. Navigating the menus MENU Press to display the Main menu. ENTER Press to select menus, to adjust selected items, or move on-screen cursor left or right. ENTER Press to select the menu items. ENTER Press to confirm your selection or enter a sub-menu. EXIT Press to close the menu or return to the previous screen. On-screen menu overview Use the on-screen menu to configure the various operational settings of your TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table: Video Audio Setup Picture Mode Lets you enable one of six preset viewing options optimized for different viewing conditions. Brightness Lets you adjust the level of brightness on the screen. Increasing brightness can add more light to dark areas of the picture. Contrast Lets you adjust the level of picture contrast. Increasing the contrast adds more light to the white areas of the picture. Color Lets you adjust the level of color intensity. Tint Lets you adjust the overall color of the picture (only supported in TV/AV mode). Sharpness Lets you adjust the focus of the picture. Increase sharpness for a clearer picture, or decrease sharpness for a smoother picture. Color Lets you select one of three preset color temperature temperature settings: Cool, Standard, or Warm. Advanced Accesses advanced video settings such as Video Adaptive Contrast, Noise Reduction, Overscan (in HDMI only), and Dynex Motion 120Hz. Balance Lets you adjust the balance between the left and right speakers. Surround Lets you turn the surround sound effect on or Sound off. Equalizer Lets you select the audio frequency you want to adjust and change its value. Auto Volume Control Lets you select whether to apply the audio settings for all input sources, as well as for both analog and digital TV channels (OFF), or only to the current one (ON). SPDIF Type Lets you select the preferred audio format for SPDIF audio signals. SPDIF is only available on digital channels or when using an HDMI device. Choose from PCM, RAW, or Off. OSD Lets you select the language for the on-screen Language display. Choose from English, French, or Spanish. Screen Mode Lets you select the aspect ratio of the screen. Choose from AUTO, Normal, Wide, or Cinema to Zoom. DPMS Use this setting when using your TV with a computer. When using a connected computer, lets the computer control if the screen is on or off. Time Setup Lets you configure the system clock and time zone settings. You can also choose to enable the Date/Time features and set up the sleep timer. Caption Lets you configure the settings for closed captioning (CC, also known as subtitles) in TV programs. Reset Default Lets you reset all operational settings to their default factory value. Do this only if any of the following conditions occurs: • The system fails to respond to the remote control (make sure the remote control batteries are still working and that you are within the transmission range). • The new configuration settings cause unexpected results. • You forget the system PIN.