EMC DS-5100B Hardware Reference - Page 19

Chapter Brocade 5100 Installation and Configuration 2 In this chapter •Items included with the Brocade 5100 7 •Installation and safety considerations 7 •Installing a standalone Brocade 5100 9 •Cabinet installation for a Brocade 5100 10 •Brocade 5100 configuration 10 Items included with the Brocade 5100 The following items are included with the standard shipment of the Brocade 5100. When you open the Brocade 5100 packaging, verify that these items are included in the package and that no damage has occurred during shipping: • The Brocade 5100 switch, containing two power supply/fan assembly units • One accessory kit containing: • Serial Cable with an RJ-45 connector • 6 ft. Power Cord • Rubber feet, required for setting up the switch as a standalone unit • Brocade Family Doc CD • Brocade 5100 QuickStart Guide • EZSwitchSetup CD Installation and safety considerations You can install the Brocade 5100 switch in the following ways: 1. As a standalone unit on a flat surface. 2. In an EIA cabinet using a fixed-rail rack mount kit. The optional fixed-rail rack mount kit can be ordered from your switch retailer. 3. In an EIA cabinet using an optional slide-rail rack mount kit. The optional slide-rail rack mount kit can be ordered from your switch retailer. When mounting into a slide-rail rack, you can mount the chassis to slide from either the port side or the non-port side. 4. In an EIA cabinet using an optional mid-mount rack kit for switches. The optional mid-mount rack kit for switches can be ordered from your switch retailer. Brocade 5100 Hardware Reference Manual 7 53-1000854-02