EMC DS-5100B Hardware Reference - Page 41

Environmental requirements A TABLE 5 Power Supply Specifications Specification Value System power consumption Input voltage Input line frequency BTU rating Inrush current 84 Watts nominal, 91 Watts Maximum 85 - 264 VAC, Universal 47 - 63 Hz 406 BTU/hr 35 Amps Maximum Environmental requirements Table 6 lists the acceptable environmental ranges for both operating and nonoperating (such as during transportation or storage) conditions. TABLE 6 Environmental Requirements Condition Acceptable During Operation Acceptable During Non-Operation Ambient Temperature 0° to 40° Celsius (32° to 104° Fahrenheit) -25° to 70° Celsius (-13° to 158° Fahrenheit) Humidity 10% to 85% RH non-condensing, at 40° Celsius (104° Fahrenheit), with maximum gradient of 10% per hour 10% to 90% RH non-condensing, at 70° Celsius (158° Fahrenheit) Altitude 3,000 meters (9,842 feet) above sea level 0 to 12 kilometers (39,370 feet) above sea level Shock 20 G, 6 ms, half-sine wave Half sine, 33G 11ms, 3/e.g. Axis Vibration 0.5 G sine, 0.4 grms random, 5-500 Hz 2.0 G sine, 1.1 grms random 5-500 Hz Air flow High speed, 13,000 RPM, 49.3 CMH (29 CFM) None required Low speed, 7000 RPM, 37.4 CMH (22 CFM) General specifications Table 7 lists the general specifications for the Brocade 5100. TABLE 7 General Specifications Specification Description Configurable port types System architecture System processor ANSI Fibre Channel protocol E_Port, F_Port, FL_Port, M_Port, and EX_Port Nonblocking shared-memory switch Power PC 440EPX,667 MHz CPU FC-PH (Fibre Channel Physical and Signalling Interface standard) Modes of operation Fibre Channel Class 2 and Class 3 Fabric initialization Complies with FC-SW-3 Rev. 6.6 FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of FCA profile Brocade 5100 Hardware Reference Manual 29 53-1000854-02