Edimax AR-7186WnA Manual - Page 35
Static IP
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Connection Type 4.2.4. Static IP Please check with your ISP the method of multiplexing. In Bridge Mode, please select "ADSLTYPE_ROUTER_LLC" or "ADSLTYPE_ROUTER_VCMUX". Parameter VPI VCI Description Virtual path identifier (VPI) is the virtual path between two points in an ATM network. Its valid value is in the range of 0 to 255. Enter the correct VPI provided by your ISP. By default, VPI is set to 8. Virtual channel identifier (VCI) is the virtual channel between two points in an ATM network. Its valid value is in the range of 32 to 65535. (0 to 31 is reserved for local management of ATM traffic) Enter the correct 35
35
Connection Type
Please check with your ISP the method of
multiplexing. In Bridge Mode, please select
“ADSLTYPE_ROUTER_LLC” or
“ADSLTYPE_ROUTER_VCMUX”.
4.2.4.
Static IP
Parameter
Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its
valid value is in the range of 0 to 255. Enter
the correct VPI provided by your ISP. By
default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual
channel between two points in an ATM
network. Its valid value is in the range of 32 to
65535. (0 to 31 is reserved for local
management of ATM traffic) Enter the correct