Edimax AR-7186WnA Manual - Page 69
Field, Description, One-to-One, Many-to-One, Many-to-Many, Overload, Many-to-Many No Overload,
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
The following table describes the parameters of this page: Field Description The Virtual server rule index for this VC. You can specify Rule Index 10 rules in maximum. All the VCs with single IP will use the same Virtual Server rules. Rule Type Choose the One-to-One, Many-to-One, Many-to-Many Overload, Many-to-Many No Overload, or Server. Enter the local IP Address you plan to map to. Local Start Local Start/End IP is the starting local IP address and Local End IP is the IP ending local IP address. If the rule is for all local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255. Enter the public IP Address you want to use for NAT. Public Start/End Public Start IP is the starting public IP address and Public IP End IP is the ending public IP address. If you have a dynamic IP, enter 0.0.0.0 as the Public Start IP. 5.5.4. QoS The QoS provides better service of selected network traffic over various technologies. This function can be set based on the physical LAN ports or wireless interfaces under IPv4 or IPv6 version respectively. IP Version: IPv4 Choose Advanced Setup > QoS, the page shown in the following figure appears. 69