Edimax AR-7186WnA Manual - Page 45
Field, Description, Static IP Address
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
The following table describes the parameters in this page: Field Description Country Select the country you are in. ISP Select your Internet Service Provider (ISP). Virtual path identifier (VPI) is the virtual path between two VPI points in an ATM network. Its valid value is between 0 and 255. Enter the correct VPI provided by your ISP. Virtual channel identifier (VCI) is the virtual channel between VCI two points in an ATM network. Its valid value is between 1 and 65535. Enter the correct VCI provided by your ISP. Connection Type Select a connection type from the dropdown list. You may select PPPoE/ PPPoA/ Dynamic IP/ Static IP/ Routered IP/ Bridge. Bridge Mode. Static IP Address Select Static IP Address, click NEXT, and the page as shown in the following figure will appear. The following table describes the parameters in this page: Field Description Virtual path identifier (VPI) is the virtual path between two VPI points in an ATM network. Its valid value is between 0 and 255. Enter the correct VPI provided by your ISP. By default, 45