Edimax AR-7186WnA Manual - Page 65
Field, Description, Advanced Setup
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
The following table describes the parameters and buttons of this page: Field Description Destination Enter the IP address of the destination device. IP Address IP Subnet Enter the subnet mask of the destination device. Mask Gateway IP You can enter the IP address of the next hop in the IP route to Address the destination device, or bind with a PVC interface. Metric The metric cost for the destination. This parameter determines if the ADSL router will include the Announced in RIP route to this remote node in its RIP broadcasts. If set to Yes, the route to this remote node will be propagated to other hosts through RIP broadcasts. If No, this route is kept private and is not included in RIP broadcasts. 5.5.3. NAT Click Advanced Setup > NAT, the page shown in the following figure appears. In this page, you can set up the NAT (Network Address Translation) function for your ADSL router. This function allows you to share one WAN IP address for multiple computers on your LAN. 65