Edimax AR-7186WnA Manual - Page 53
Field, Description, RIP2-B, RIP2-M, IN Only, OUT Only, IGMP-v1, IGMP-v2, Disabled, IPv6 Options,
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Field IP Subnet Mask Gateway NAT Dynamic Route Direction Multicast IPv6 Options IPv6 Address IPv6 Default Gateway IPv6 DNS Server1 IPv6 DNS Server2 MLD Proxy Dual Stack Lite Enable Description You can enter the IP subnet mask for dial-up, which is provided by your ISP. You can enter the gate way IP for dial-up, which is provided by your ISP. Select whether to enable Network Address Translation (NAT) function. If you do not enable NAT, you must add a route on the uplink equipment, otherwise Internet access will fail. Normally NAT is enabled. You can select RIP1, RIP2-B or RIP2-M. You can select None, Both, IN Only or OUT Only. IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a multicast group. The ADSL Router supports both IGMP version 1 (IGMP-v1) and IGMP version 2 (IGMP-v2). Select Disabled to disable it. Set Static IPv6 address. Set Static IPv6 Gateway. Set Static IPv6 DNS1. Set Static IPv6 DNS2. You may enable or disable MLD Proxy. MLD proxy is enabled only for route mode. It works in an IPv6 environment. You may Enable or Disable the Dual Stack Lite. The ADSL Router support IPv4/v6 Dual Stack Internet Protocol. 53