Edimax AR-7186WnA Manual - Page 46
PPPoE/PPPoA
View all Edimax AR-7186WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Field VPI is set to 8. Description Virtual channel identifier (VCI) is the virtual channel between VCI two points in an ATM network. Its valid value is between 1 and 65535. Enter the correct VCI provided by your ISP. By default, VCI is set to 35. IP Address Enter the IP address provided by your ISP. Subnet Enter the subnet mask provided by your ISP. Mask ISP Enter the default gateway provided by your ISP. Gateway Connection You can select LLC or VC-Mux. In this example, the Type encapsulation mode is set to 1483 Bridged IP LLC. 5.3.1. PPPoE/PPPoA Select PPPoE/PPPoA, click NEXT, and the page as shown in the following figure will appear. The following table describes the parameters in this page: Field Description Username Enter the username for PPPoE dial-up, which is provided by your ISP. Password Enter the password for PPPoE dial-up, which is provided by your ISP. VPI Virtual path identifier (VPI) is the virtual path between two points in an ATM network. Its valid value is between 0 and 46