Epson 5700i User Manual - Page 60

Operational problems, The ready light green does not turn on when you turn the, printer

Get Epson 5700i - EPL B/W Laser Printer PDF manuals and user guides
UPC - 010343818620
View all Epson 5700i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Operational problems The ready light (green) does not turn on when you turn the printer on Turn off the printer and check the power cord connections between the printer and the electrical outlet; then turn the printer back on. If the electrical outlet is controlled by an outside source such as a wall switch, make sure the switch is turned on or plug another electrical device into the outlet to check whether the outlet is operating properly. The ready light (green) is on but nothing prints Your computer may not be properly connected to the printer. Perform the procedure described in "Connecting to the computer" in the Getting Ready guide. The interface cable may not be plugged in securely. Check both ends of the cable between the printer and the computer. Be sure to secure the connector using the wire retaining clips. Make sure you use a double-shielded, twisted-pair interface cable no more than six feet in length. The developer cartridge may be empty. To replace the cartridge, see "Replacing the developer cartridge" on page 5-2. 4-12 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
4-12
Troubleshooting
Operational problems
Turn off the printer and check the power cord connections
between the printer and the electrical outlet; then turn the printer
back on.
If the electrical outlet is controlled by an outside source such as a
wall switch, make sure the switch is turned on or plug another
electrical device into the outlet to check whether the outlet is
operating properly.
Your computer may not be properly connected to the printer.
Perform the procedure described in “Connecting to the
computer” in the
Getting Ready
guide.
The interface cable may not be plugged in securely. Check both
ends of the cable between the printer and the computer. Be sure
to secure the connector using the wire retaining clips.
Make sure you use a double-shielded, twisted-pair interface cable
no more than six feet in length.
The developer cartridge may be empty. To replace the cartridge,
see “Replacing the developer cartridge” on page 5-2.
The ready light (green) does not turn on when you turn the
printer on
The ready light (green) is on but nothing prints