Epson 680Pro User Manual - Page 151
Continuous paper standard and multipart: rear entr, Gathering area up to 0.9 mm
UPC - 010343832138
View all Epson 680Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Continuous paper (standard and multipart): rear entry Width 101.6 to 304.8 mm (4 to 12 inches) Length (one page) 101.6 to 558.8 mm (4 to 22 inches) Copies 1 original + up to 5 copies Thickness Printable area 0.065 to 0.46 mm (0.0025 to 0.018 inch) Gathering area up to 0.9 mm (0.035 inch) Weight (not multipart) 52 to 128 g/m² (14 to 34 lb) Weight 40 to 58 g/m² (10 to 15 lb) (one sheet of multipart) Binding Point glue or/and paper staples on both sides Note: t The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1. t The thickness of the perforation part when extended should be 2 mm or less. C t The perforation between pages should not extend all the way to the edges of the paper. Uncut length on the edges should be 1 mm or more. t When the horizontal and vertical perforation cuts crossing, do not print in between 3 mm above and below the horizontal perforation and in between 28 mm left and right the vertical perforation. Specifications C-9