Epson 680Pro User Manual - Page 63
Adjusting the tear-off position, Tear Off, Pause, LF/FF, Load/Eject
UPC - 010343832138
View all Epson 680Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Adjusting the tear-off position If your continuous paper perforation is not aligned with the tear- off edge, you can use the micro-adjust feature to move the perforation to the tear-off position as follows: 2 1. Make sure both Tear Off lights are flashing (the paper is at the current tear-off position). You may need to press the Tear Off button. (See "Using the Tear Off button" on page 2-15 for more information.) 2. Hold down the Pause button for about three seconds. The Pause light begins flashing and the printer enters the microadjust mode. 3. Press the LF/FF [D] button to feed paper forward, or press the Load/Eject [U] button to feed paper backward, until the paper perforation is aligned with the tear-off edge. Note: The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position beyond these limits, the printer beeps and stops moving the paper. Paper Handling 2-31