Epson 680Pro User Manual - Page 89
About Your Printer's Default Settings, Changing Printer Settings From the Printer's Control Panel - lq esc p 2 driver
UPC - 010343832138
View all Epson 680Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
About Your Printer's Default Settings The default settings control many printer functions. While you can often set these functions through your software or printer driver, you may sometimes need to change a default setting from the printer's control panel using the default-setting mode. The following table lists the default settings and the options you can select in the default-setting mode. The settings are explained in detail after the table. For instructions on changing the default settings, see "Changing default settings" on page 4-9. 4 Settings Page length for tractor* Skip over perforation Auto tear off Auto line feed Options Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17 On, Off On, Off On, Off Print direction Software Bi-D, Uni-D, Auto ESC/P2, IBM 2390 Plus 0 slash High speed draft 0, 0 On, Off I/F mode Auto I/F wait time Auto, Parallel, Option 10 seconds, 30 seconds Parallel I/F bidirectional mode On, Off Packet mode Auto CR (IBM 2390 Plus)** Auto, Off On, Off A.G.M. (IBM 2390 Plus)** On, Off * The options available vary depending on the country of purchase. ** These settings take effect only when IBM 2390 Plus emulation is selected. ***This option is available with the LQ-680Pro only. Changing Printer Settings From the Printer's Control Panel 4-3