Epson BrightLink EB-735Fi Installation Guide - Page 51
Adjust the vertical slide position of the arm, Tightening the M8 hexagon bolt lowers the wall mount
View all Epson BrightLink EB-735Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
English F Adjust the vertical slide position of the arm 1. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount ( ), or the hexagonal shaft at the top of the wall mount ( ). Start by aligning the notch on the arm with the alignment mark on the wall plate as shown below ( ). Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it ( ). Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it ( ). 2. Secure the wall mount with the M6 × 20 mm hexagon shoulder bolt. 51
51
English
F
Adjust the vertical slide position of the arm
1.
Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount (
), or the
hexagonal shaft at the top of the wall mount (
). Start by aligning the notch on the arm with the
alignment mark on the wall plate as shown below (
).
Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it (
).
Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it (
).
2.
Secure the wall mount with the M6 × 20 mm hexagon shoulder bolt.