Epson BrightLink EB-735Fi Installation Guide - Page 93
Connect the power cable, Attach the control pad, Make sure the control pad is firmly attached.
View all Epson BrightLink EB-735Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
English B Connect the power cable Connect the power cable and route it down the groove on the back of the control pad. C Attach the control pad Attach the control pad with commercially available M4 × 20 mm screws (×4). Warning ❏ Make sure the screws are not angled. ❏ Make sure the control pad is firmly attached. ❏ Do not attach the control pad with double-side tape or magnets. Check that the control pad is operating correctly before attaching it with the screws. 93
93
English
B
Connect the power cable
Connect the power cable and route it down the groove on the back of the control pad.
C
Attach the control pad
Attach the control pad with commercially available M4 × 20 mm screws (×4).
Check that the control pad is operating correctly before attaching it with the screws.
❏
Make sure the screws are not angled.
❏
Make sure the control pad is firmly attached.
❏
Do not attach the control pad with double-side tape or magnets.
Warning