Epson BrightLink Solo Interactive Module ELPIU01 Quick Setup Guide - Page 12
If
View all Epson BrightLink Solo Interactive Module ELPIU01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
If not, change the projector's position so that the distance from the top of the projector lens to the top of the image is less than the calculated value. For example, you may need to lower the projector or tilt it down as shown: Note Consult a qualified projector specialist if you need to adjust your projector's position. Sample Calculation For example, if your projector is mounted 10 feet (3 m) away from the wall (distance c) for a 96-inch WXGA image, the interactive module would be mounted 15.6 inches (396 mm) above the image area (distance b), according to the table on page 9. The distance from the top of the projector lens to the top of the image (a) might be 30 inches (762 mm). You would calculate the following: 15.6 -5.9 inches × 120/41.73 inches = 27.9 inches. or 396 -150 mm × 3048/1060 mm = 709 mm. The a distance (30 inches or 762 mm) is more than 27.9 inches (709 mm). You would need to lower the projector by 2.1 inches (53 mm). 12