Epson MovieMate 25 User's Guide - Page 34

Viewing and Adjusting Video Information, following items - lamp replacement

Get Epson MovieMate 25 - With Screen PDF manuals and user guides View all Epson MovieMate 25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

You can adjust the following items for various viewing conditions and individual videos: ■ Brightness ■ Contrast ■ Color Saturation ■ Tint (only works on NTSC signals) ■ Sharpness ■ Keystone: Corrects the distorted image shape caused by tilting MovieMate up or down, as shown. 3. Press or to increase or decrease the setting. The settings are saved, even after you turn MovieMate off. Viewing and Adjusting Video Information You can use the Visual Info. button on the remote control to view the number of hours the lamp has been used, and to reset the timer after you install a new lamp. You can also adjust the video signal setting and select high altitude mode if necessary. 1. Press the button on the remote control. You see the following on the screen: Note: If the lamp has been used less than 11 hours, 0H is displayed. 2. To adjust the video signal, reset the lamp hours, or select high altitude mode, continue pressing the button until you see the item you want to set. You can adjust the following items: ■ Video Signal: If you are using external video equipment and you see interference or other problems, select the appropriate signal for your equipment. For most purposes, leave this setting on Auto. ■ High Altitude Mode: If you are using MovieMate at an altitude above 4,900 feet, select ON. ■ Lamp-Hours Reset: After you replace the lamp, select Yes to reset the lamp timer. 3. Press or to change the setting. 34 Doing More with MovieMate

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
34
Doing More with MovieMate
You can adjust the following items for various viewing conditions and individual videos:
■
Brightness
■
Contrast
■
Color Saturation
■
Tint
(only works on NTSC signals)
■
Sharpness
■
Keystone:
Corrects the distorted image shape caused
by tilting MovieMate up or down, as shown.
3.
Press
or
to increase or decrease the setting.
The settings are saved, even after you turn MovieMate off.
Viewing and Adjusting Video Information
You can use the
Visual Info
. button on the remote control to view the number of hours the
lamp has been used, and to reset the timer after you install a new lamp. You can also adjust
the video signal setting and select high altitude mode if necessary.
1.
Press the
button on the remote control. You see the following on the screen:
Note:
If the lamp has been used less than 11 hours, 0H is displayed.
2.
To adjust the video signal, reset the lamp hours, or select high altitude mode, continue
pressing the
button until you see the item you want to set. You can adjust the
following items:
■
Video Signal:
If you are using external video equipment and you see interference or
other problems, select the appropriate signal for your equipment. For most purposes,
leave this setting on
Auto.
■
High Altitude Mode:
If you are using MovieMate at an altitude above 4,900 feet,
select
ON.
■
Lamp-Hours Reset:
After you replace the lamp, select
Yes
to reset the lamp timer.
3.
Press
or
to change the setting.