Epson MovieMate 25 User's Guide - Page 51

Problems with External Video Equipment No picture appears on the screen. ■ Make sure the equipment is turned on. ■ Press the Power button on MovieMate or on the remote control. ■ Press the or Play button on the external equipment. ■ Make sure you don't have cables connected to both the S-video and Video ports. You can only use one connection at a time (see pages 35 and 36). You see the message No Signal. ■ Make sure the equipment is turned on. ■ Make sure your cable(s) are connected correctly (see pages 35 and 36). ■ Press the button on MovieMate or the remote control to select the external video source. Allow a few seconds for MovieMate to sync up. You see the message Signal not supported. Press the page 34). button on the remote control and check the Video Signal setting (see The picture is cut off (too large) or too small. Press the button on the remote control and select the appropriate aspect ratio. The picture is distorted. ■ If you're using an extension cable, electrical interference may affect the signal. ■ Check the solutions on pages 48 and 49. The colors are not right. ■ Press the page 34). button on the remote control and check the Video Signal setting (see ■ Press the button on the remote control to select the best setting for your viewing environment. ■ Adjust the Color Saturation or Tint settings. See page 33. Problem Solving 51