Epson PictureMate Pal - PM 200 Product Information Guide - Page 2

PictureMate Pal (PM 200) Mechanical Paper path Sheet feeder capacity Dimensions Weight Printable area Sheet feeder, top entry 20 sheets Storage Width: 8.5 inches (215 mm) Depth: 6.0 inches (152 mm) Height: 5.7 inches (145 mm) Printing (with paper support and output tray open) Width: 8.5 inches (215 mm) Depth: 13.3 inches (339 mm) Height: 10.3 inches (262 mm) 5.3 lb (2.4 kg) without photo cartridge or AC adapter Border printing: 0.12 inch (3 mm) margin on all sides of the paper Borderless printing: no margins Electrical 120 V Model Input voltage range 110 to 120 V Rated current 0.3 A (max. 0.4 A) Power consumption (approximate) Printing 10.0 W Sleep mode 4.0 W Powered off 0.2 W 220 V Model 220 to 240 V 0.15 A (max. 0.3 A) 10 W 4.0 W 0.3 W Note: Check the label on the bottom of PictureMate Pal for voltage information. AC Adapter Model Rated voltage Input voltage range Rated frequency Input frequency range Rated current Rated electrical power Output A381H AC 100 to 240 V AC 90 to 264 V 50 to 60 Hz 49.5 to 60.5 Hz 0.4 to 0.8 A 40 to 42 W DC 20 V, 1.68 A Environmental Temperature Humidity Operation: 50 to 95 °F (10 to 35 °C) Storage: -4 to 140 °F (-20 to 60 °C) 1 month at 104 °F (40 °C) Operation: 20 to 80% RH Storage (in shipping container): 5 to 85% RH (without condensation) Memory Card Slots Card slots Voltage requirements CF Type II card slot Compatible with "CF+ and CompactFlash™ Specification 1.4" Sony Memory Stick®/ MemoryStick PRO™/ Duo (requires adapter) card slot Compatible with "Memory Stick Standard version 1.3" Compatible with "Memory Stick Standard Memory Stick PRO Format Specifications version 1.0" SD™ (Secure Digital)/ MMC™ (MultiMediaCard™) card slot Compatible with "SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0" Compatible with "MultiMediaCard Standard" xD-Picture Card™ slot Compatible with "xDPicture Card Card Specification Version 1.20 Type M Card/Type H Card" 3.3 V Maximum current is 500 mA Computer USB Interface Connectivity Bit rate Connector type Data Encoding Recommended cable length Universal Serial Bus Specifications Revision 2.0 Universal Serial Bus Specifications Revision 1.1 480 Mbps (High speed device) USB Series B NRZI Less than 6 feet (1.8 meters) External Device Interface Connectivity Bit rate Connector type Universal Serial Bus Specifications Revision 1.1* 12 Mbps (Full speed device) USB Series A Data Encoding Recommended cable length NRZI Less than 6 feet (1.8 meters) * Not all USB devices are supported. Safety Approvals Safety EMC UL 60950-1 CSA C22.2 No. 60950-1 FCC part 15 Subpart B class B CSA C108.8 Class B 2 - PictureMate Pal (PM 200) 6/06