Epson PowerLite 715c Product Information Guide - Page 3

Computer Connector Pin Assignments, Projector Placement Guidelines, Starting Up the Projector - powerlite 505c

Page 3 highlights

EPSON PowerLite 505c/715c Projector Computer Connector Pin Assignments The Computer/Component video port is a female video RGB, 15-pin micro-D-style connector. The pin assignments are: Input pin Computer connector signals 1 Red video 2 Green video 3 Blue video 4 Monitor (ID bit 2) 5 GND 6 Red video GND 7 Green video GND 8 Blue video GND 9 +5 V 10 Synchronous GND 11 Monitor (ID bit 0) 12 SDA 13 Horizontal sync 14 Vertical sync 15 Reserved Projector Placement Guidelines ❏ Place the projector on a sturdy, level surface, between 3.6 and 45.5 feet from the screen. ❏ Make sure there is plenty of space for ventilation around and under the projector. ❏ Make sure the projector is within 6 feet of a grounded electrical outlet or extension cord. If you're using a computer and/or video source, locate them within 5 feet of the projector. ❏ Place the projector directly in front of the center of the screen, facing it toward the screen squarely. Otherwise, your image will not be square. The distance from the projector to the screen determines the actual size of the projected image. Use the general guidelines in the table below to determine the proper distance. Image size (diagonal) 30 inches 40 inches 60 inches 80 inches 100 inches 120 inches 150 inches 200 inches 300 inches Horizontal distance from projector to screen 3.6 to 4.3 feet (1.1 to 1.3 meters) 4.8 to 5.8 feet (1.5 to 1.8 meters) 7.4 to 8.9 feet (2.2 to 2.7 meters) 9.9 to 11.9 feet (3.0 to 3.7 meters) 12.4 to 15.0 feet (3.8 to 4.6 meters) 15.0 to 17.7 (4.6 to 5.4 meters) 18.7 feet to 22.6 (5.7 to 6.9 meters) 25.0 to 30.2 feet (7.6 to 9.2 meters) 37.6 to 45.5 feet (11.5 to 13.9 meters) Starting Up the Projector Follow these steps to start up the projector: 1. Connect one end of the power cord to the projector's power inlet. power light 2. Connect the other end to a grounded electrical outlet. The power light on top of the projector turns orange, indicating that the projector is receiving power but not yet turned on. 1/01 EPSON PowerLite 505c/715c Projector - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

EPSON PowerLite 505c/715c Projector
1/01
EPSON PowerLite 505c/715c Projector
- 3
Computer Connector Pin Assignments
The Computer/Component video port is a female video RGB,
15-pin micro-D-style connector. The pin assignments are:
Projector Placement Guidelines
Place the projector on a sturdy, level surface, between
3.6 and 45.5 feet from the screen.
Make sure there is plenty of space for ventilation around and
under the projector.
Make sure the projector is within 6 feet of a grounded
electrical outlet or extension cord. If you
re using a computer
and/or video source, locate them within 5 feet of the
projector.
Place the projector directly in front of the center of the
screen, facing it toward the screen squarely. Otherwise, your
image will not be square.
The distance from the projector to the screen determines the
actual size of the projected image. Use the general guidelines
in the table below to determine the proper distance.
Starting Up the Projector
Follow these steps to start up the projector:
1.
Connect one end of the power cord to the projector
s power
inlet.
2.
Connect the other end to a grounded electrical outlet.
The power light on top of the projector turns orange,
indicating that the projector is receiving power but not yet
turned on.
Input pin
Computer connector signals
1
Red video
2
Green video
3
Blue video
4
Monitor (ID bit 2)
5
GND
6
Red video GND
7
Green video GND
8
Blue video GND
9
+5 V
10
Synchronous GND
11
Monitor (ID bit 0)
12
SDA
13
Horizontal sync
14
Vertical sync
15
Reserved
Image size
(diagonal)
Horizontal distance from projector to
screen
30 inches
3.6 to 4.3 feet (1.1 to 1.3 meters)
40 inches
4.8 to 5.8 feet (1.5 to 1.8 meters)
60 inches
7.4 to 8.9 feet (2.2 to 2.7 meters)
80 inches
9.9 to 11.9 feet (3.0 to 3.7 meters)
100 inches
12.4 to 15.0 feet (3.8 to 4.6 meters)
120 inches
15.0 to 17.7 (4.6 to 5.4 meters)
150 inches
18.7 feet to 22.6 (5.7 to 6.9 meters)
200 inches
25.0 to 30.2 feet (7.6 to 9.2 meters)
300 inches
37.6 to 45.5 feet (11.5 to 13.9 meters)
power light