Epson PowerLite Pro Cinema 4040 Users Guide - Page 103

Setting Direct Power On Sleep Mode Sleep Mode Timer Illumination Trigger Out High Altitude Mode Description Turns on the projector when you plug it in Automatically places the projector in standby mode after an interval of inactivity Sets the time before the projector automatically turns off (Sleep Mode must be turned on) Turns off the lights on the projector Outputs a DC 12V signal from the 3.5 mm mini-jack Trigger Out port whenever the projector is turned on Regulates the projector's operating temperature at altitudes above 4921 feet (1500 m) Note: If you select Anamorphic Wide as the Trigger Out setting, voltage is only output from the Trigger out port when the Aspect setting is set to Anamorphic Wide or Horiz. Squeeze (PowerLite Pro Cinema 6040UB). Note: The Reset setting does not reset the Memory, Projection, High Altitude Mode, Standby Mode or Language settings. Parent topic: Adjusting the Menu Settings Related concepts Projection Modes Related references Available Image Aspect Ratios Related tasks Using the Home Screen Selecting External Network Detection Settings Using Picture in Picture Adjusting the Color Convergence (Panel Alignment) Connecting to a Trigger Out Port 103