Epson PowerLite Pro Cinema 4040 Users Guide - Page 56
Pairing the 3D Glasses with the Projector, Parent topic, Related references, Related tasks
View all Epson PowerLite Pro Cinema 4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3. Begin playback from the video device. Note: Make sure you set the video device to play content in 3D mode. 4. Slide the power switch on the 3D glasses to the On position. 5. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector. Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing. Pairing the 3D Glasses with the Projector Charging the 3D Glasses 3D Viewing Range Parent topic: Using Basic Projector Features Related references Input Signal Settings - Signal Menu Related tasks Connecting to an HDMI Video Source Connecting to a Computer for HDMI Video Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI on the projector. 56