Epson PowerLite Pro Cinema 4040 Users Guide - Page 106

Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Projector Info information Information item Lamp Hours Source Input Signal Resolution Scan Mode Refresh Rate 3D Format Sync Info Color Depth Color Format Status Serial Number Event ID Description Displays the number of hours (H) the lamp has been used Displays the name of the port to which the current input source is connected Displays the input signal setting of the current input source Displays the resolution of the current input source Displays the scan mode of the current input source Displays the refresh rate of the current input source Displays the format of the 3D signal Displays information that may be needed by a service technician Displays the color depth and color difference Displays information about the color space and dynamic range Displays information about projector problems that may be needed by a service technician Displays the projector's serial number Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings Related tasks Replacing the Lamp Resetting the Lamp Timer Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code. 106