Epson PowerLite Pro Cinema 4040 Users Guide - Page 74

Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture Temporarily Using Picture in Picture Adjusting the Color Convergence (Panel Alignment) Adjusting the Color Tone (Color Uniformity) Projector Security Features Saving Settings to Memory and Using Saved Settings Saving the Lens Position and Using Saved Lens Positions Shutting Off the Picture Temporarily You can temporarily turn off the projected picture if you want to redirect your audience's attention during a presentation. Any video action continues to run, however, so you cannot resume projection at the point that you stopped it. 1. Press the Blank button on the remote control to temporarily stop projection. 2. To turn the picture back on, press the Blank button again. Parent topic: Adjusting Projector Features Using Picture in Picture You can use Picture in Picture mode to view two image sources simultaneously. Note: You can display only HDMI video sources when using Picture in Picture mode. You cannot use Picture in Picture while projecting 3D or 4K images. 1. Turn on the projector and switch to the HDMI image source you want to use. 74