Epson PowerLite Pro Cinema 4040 Users Guide - Page 139

Projector Feature Settings - Settings Menu Related tasks Replacing the Remote Control Batteries Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. Do not attempt to enter the password again. Provide the request code and proof of ownership for assistance in unlocking the projector. • If you lose the remote control, you cannot enter a password. Order a new one from Epson. Parent topic: Solving Projector or Remote Control Operation Problems Related references Where to Get Help Optional Equipment and Replacement Parts Projector Feature Settings - Settings Menu Solutions to Panel Alignment Problems If the panel alignment does not result in a satisfactory picture, try the following solutions: • Make sure the Projection setting matches the installation position. • Make sure the projection surface is not colored or textured. Project on a white surface with no texture. • Leave the projector on for 10 to 15 minutes before adjusting the panel alignment. • The projected image size should be at least 60 inches (152 cm) during panel alignment. • If the image contains too much magenta, adjust the red and blue panels. • If the pattern lines look fuzzy or out of focus, adjust the focus before performing the panel alignment. Parent topic: Solving Projector or Remote Control Operation Problems Related references Projection Distance Related tasks Adjusting the Color Convergence (Panel Alignment) 139