Epson PowerLite Pro Cinema 4040 Users Guide - Page 31
Connecting to External Speakers, Connecting to a Trigger Out Port
View all Epson PowerLite Pro Cinema 4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
To remove the cable clips, open the clamps and disconnect the cables. Then pinch the sides of each guide and carefully pull them out of the cable clip holes. Parent topic: Projector Connections Connecting to External Speakers To add sound, you can connect your video source and speakers to an audio video receiver, then connect the receiver to the projector using one of the receiver's compatible video outputs (an HDMI connection provides the best image quality, if available). You can also connect speakers to any video source that has its own speaker connections. 1 Video source 2 Surround sound speakers 3 Receiver 4 Video cable Parent topic: Projector Connections Connecting to a Trigger Out Port You can connect your projector to external devices such as motorized screens that support a trigger signal. When active, a 12V signal is sent to the connected device while the projector is powered on. 1. Connect a 3.5 mm stereo mini-jack cable to the external device's trigger port. See your device's documentation for details. 31