Epson PowerLite Pro Cinema 800 User's Guide - Page 22

Turning Off the Projector, Selecting the Image Source

Get Epson PowerLite Pro Cinema 800 PDF manuals and user guides View all Epson PowerLite Pro Cinema 800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Note: To keep children from turning on the projector, you can use the Child Lock (see page 31). If you'll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for details. The projector takes about 10 seconds to warm up and display an image. If you don't see a picture, you may need to change the image source as described on the next page. Turning Off the Projector 1. Turn off any equipment connected to the projector. 2. Press the Off button on the remote control, or press the Power button on the projector twice. 3. Let the projector cool down for about 30 seconds. 4. When the Ppower light stops flashing and stays on, turn off the projector's power switch on the back. It is now safe to unplug the projector, if necessary. Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the overall life of the product. Never unplug the projector without turning it off and letting it cool as described above, or you could damage it and reduce lamp life. Selecting the Image Source The Source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a DVD player, cable or satellite box, or video game console). Press the Source button on the remote control that corresponds to the port to which your video source is connected. Source buttons 22 Setting Up the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
22
Setting Up the Projector
Note:
To keep children from turning on the projector, you can use the Child Lock (see page 31).
If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for
details.
The projector takes about 10 seconds to warm up and display an image. If you don’t see a
picture, you may need to change the image source as described on the next page.
Turning Off the Projector
1.
Turn off any equipment connected to the projector.
2.
Press the
Off
button on the remote control, or press the
Power
button on the projector
twice.
3.
Let the projector cool down for about 30 seconds.
4.
When the
P
power light stops flashing and stays on, turn off the projector’s power switch
on the back.
It is now safe to unplug the projector, if necessary.
Caution:
Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the
overall life of the product. Never unplug the projector without turning it off and letting it cool as
described above, or you could damage it and reduce lamp life.
Selecting the Image Source
The Source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a DVD player, cable or
satellite box, or video game console).
Press the
Source
button on the remote control that
corresponds to the port to which your video source is
connected.
Source
buttons