Epson Stylus COLOR 3000 Product Information Guide - Page 5

EPSON Stylus COLOR 3000 Electrical Specification Input voltage range Rated frequency range Input frequency range Rated current Power consumption 120V Model 220−240V Model 103.5 to 132V 198 to 264V 50 to 60 Hz 49.5 to 60.5 Hz 0.7A 0.4A Approx. 21W (ISO/IEC 10561 Letter Pattern) Note: Check the label on the back of the printer for your printer's voltage. Environmental Temperature Humidity Operation:50 to 95 °F (10 to 35 °C) Storage: -4 to 140 °F (-20 to 60 °C), stored in shipping container 1 month at 104 °F (40 °C) 120 hours at 140 °F (60 °C) Operation:20 to 80% RH Storage: 5 to 85% RH (stored in shipping container, without condensation) Safety Approvals Safety standards EMC UL 1950 with D3, CSA C22.2 950 with D3 FCC part 15 subpart B class B Interfaces Parallel interface Forward channel Data format 8-bit parallel, IEEE-1284 compatibility mode Synchronization STROBE pulse Handshake timing BUSY and ACKNLG signals Signal level TTL compatible Connector 36-pin 57-30360 Amphenol connector or equivalent Reverse channel Transmission mode IEEE-1284 Nibble mode Synchronization Refer to the IEEE-1284 specification Handshaking Refer to the IEEE-1284 specification Signal level IEEE-1284 Level 1 device Data transmission Refer to the IEEE-1284 specification timing Adaptable connector 36-pin 57-30360 Amphenol Connector or equivalent Serial interface Standard Based on RS-423 Synchronization Synchronous Bit rate Maximum 1.8 Mbps Handshaking X-ON/X-OFF, DTR protocol Word format Data bit: 8 bits Parity bit: None Start bit: 1 bit Stop bit: 1 bit Connector 8-pin mini-circular connector Recommended cable Apple® System Peripheral-8 serial cable (preferably Belkin brand) Control Panel Operate light Ink Out lights Paper Out light Pause light Media Type selection lights 5/97 EPSON Stylus COLOR 3000 - 5