Epson T-750 User Manual - Page 11
Warning
View all Epson T-750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
WARNING The power must be OFF when you move the print head. Moving the print head when the power is ON may damage your printer. If you've been using your printer just before changing the ribbon cartridge, be careful not to touch the print head because it becomes hot during use. 3. Before installing the ribbon cartridge, turn the small knob on top in the direction of the arrow to tighten the ribbon as shown in Figure l-3. Figure 1-3. Tightening the ribbon 4. Hold the cartridge by the two plastic tabs. Lower the cartridge into the printer, guiding the two pins on each end of the cartridge into the slots in the printer frame, as shown in Figure 1-4. Press firmly on each end of the cartridge to make sure the pins are firmly seated in the slots, 5. Now use the point of a pencil to guide the ribbon into place between the ribbon guide and the print head as shown in Figure l-5. (There is also a diagram on the top of the ribbon cartridge itself.) 6. With the cartridge in place, again turn the ribbon knob in the direction of the arrow to tighten the ribbon. And that's it-the ribbon is now installed. 1-4 Setting Up Your T-750 Printer