Epson T-750 User Manual - Page 68
Lprint Chr$27;w;chr$1, Lprint Chr$27;chr$112;chr$1, Lprint Chr$27;p;chr$1
View all Epson T-750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
For the following commands that use only 0 or 1 for the variable, either the ASCII codes 1 and 0 or the characters 1 and 0 can be used: ESC S, ESC U, ESC X, ESC p, ESC W, ESC S, ESC - , and ESC % For example, in BASIC you can turn on double-wide with either of these statements: LPRINT CHR$(27);"W";CHR$(1) LPRINT CHR$(27);"W";"1" The simplest type of command consists of a single character to be sent to the printer. For instance, to print in condensed mode the code format is: ASCII code: SI Decimal: 15 Hexadecimal: 0 F This code can be sent from a program by sending the code 15 directly More complex commands consist of two or more character codes. For example, to print in proportional mode the code format is the following: ASCII code: ESC p n Decimal: 27 112 n Hexadecimal: 1B 70 n In this case n can be either 1 or 0, to begin or end proportional printing. You can use either of the following commands to turn ON proportional print from BASIC: LPRINT CHR$(27);CHR$(112);CHR$(1) LPRINT CHR$(27);"p";CHR$(1) A-2 Command Summary